eXtremeRate
Xbox シリーズ X & S コントローラー用 ABXY クリッキー キット、Xbox One S/X コントローラー モデル 1708 用のカスタム ABXY キー マウス クリッキー キット、Xbox コア コントローラー モデル 1914 用のアクション ボタン クリッキー キット - X3MD003
これにより、ABXY ボタンがより速く正確に反応し、ゲームで大きなアドバンテージを得ることができます。
製品の特徴:
Xbox Series X & S コントローラー (Xbox Core コントローラー モデル 1914) 用に特別に設計されており、Xbox One S/X コントローラー (モデル 1708) とも互換性があります。
タクト スイッチ クリッキー キットは、ABXY ボタンの距離を 0.3 mm に短縮することができ、ゲームでのボタン機能をより短時間でアクティブにするのに役立ちます。
歯切れの良いクリック音により、ボタンを押したときのムズムズ感がなくなり、優れたボタンタッチを実現します。
ABXY ボタンの反応はより柔軟かつ正確で、固着しにくいです。
取り付けは簡単ですが、コントローラーを分解する必要があります。はんだ付けは必要ありません。 YouTube で「eXtremeRate ABXY Clicky Kit for Xbox Series X/S」または「rwZDqGw5s3g」を検索して、インストール ビデオ ガイドを入手してください。
eXtremeRate LED キット、リマップ キット、トリガー クリッキー キット、Xbox シリーズ X および S、Xbox One S/X コントローラーのすべてのプラスチック ボタンと互換性がありますが、eXtremeRate 金属ボタンには適合しません。
親切なリマインダー:
キットが FPC にしっかりと接着されていることを確認するため、キットを取り付けた直後はコントローラーを使用せず、24 時間後まで使用しないことをお勧めします。
パッケージ内容:
- 1 * ABXY ボタン用 FPC ボード
- 1 * 導電性パッド
- 2 * ゴムパッドセット
- 1 * T8 & T6 ドライバー
- 1 *こじ開けツール
- 19* ネジ
First off, I totally missed the product slide showing sector vs round PCB and spent a ton of time trying hacky ways of getting this product to work on my round PCB, my bad. After a ton of fiddling and trying each actuator on each button, the tape method, etc, I wound up just sticking them where they are supposed to go and had pretty good results. If you have a round PCB and are thinking of trying this product anyway, I highly recommend just trying a standard install before cutting up the self-adhesive backing material, it might work fine. My A/B/Y buttons worked perfectly and it was just X that was fiddly, and that might have been due to my Dr. Frankenstein-like experiments. Either way I ended up removing the kit and tossing it, but that's mostly my fault/preferences nothing against the product itself.
Now for the product itself, I wasn't a big fan of the clicky buttons themselves. They have a bit of travel and are still pressed by a silicon pad on the back of the face buttons so there's still some mush. I'd prefer buttons that felt more like a series d-pad. I was hoping to replicate the feel the of my recently retired Razer Wolverine Ultimate but this kit doesn't come anywhere close.
TLDR; if you're trying this with a round PCB, try a standard install before chopping things up, it might work fine. If you're looking for nice crispy button actuation with a hard bottom-out, this ain't it.