Skip to content

🐰HAPPY EASTER 10% OFF! 3/25-3/31 PDT🥚

HOLIDAY NOTICE: ORDERS DURING THE SPRING FESTIVAL HOLIDAY OF JAN. 14TH TO JAN. 29TH WILL BE SHIPPED SEQUENTIALLY FROM JAN. 30TH. THANKS FOR YOUR SUPPORT!
Skip to product information
1 of 13

eXtremeRate

eXtremeRate Hope Remap kit for Xbox Series X & S Controller - Black

Regular price $39.99
Regular price $59.99 Sale price $39.99
Sale Sold out
SKU: RX3P3009

Prepared for e-Sport Tournaments:
1. The eXtremeRate HOPE remap kit is an evolutionary upgrade kit that adds advanced gaming functionality to your existing controller for Xbox Series X / S.
2. With this remap kit, you can easily turn your existing controller for Xbox Series X / S into a professional e-Sport gamepad with additional 4 remappable remap buttons.
3. This remap upgrade solution gives you a competitive edge in online gaming and tournaments, and totally legal.
4. You can remap 14 buttons to the 4 additional buttons which will be pressed by your middle fingers.
5. It's a huge advantage for you because you don't need to move off the sticks and triggers to access other buttons like ABXY action buttons during fast FPS or shooter games.

NOTICE:
1. ONLY fits for Xbox Series X / S, for Xbox Core controller (Model 1914); Not compatible with Xbox One other controllers.
2. The controller is NOT included.
3. You need to take apart your controller for installation, high hands-on skills are required.

Installation Tips:
1. Installation difficulty: high
2. Patience needed: high
3. Please view the installation video carefully before installation.
4. Tap here to check the installation guide video: eXtremeRate Xbox Series X/S Controller (Model 1914) HOPE Remap Kit Installation Guide
5. If you have any problems during the installation process, please feel free to send us a message.
6. The FPC board needs to be soldered and the FPC board should be fixed with double-sided tape before soldering.
7. When soldering, please be careful not to pull the Hope-FPC cable, the soldering time of each TP point is less than 1 second.
8. After soldering, it can be tested with the test board.
9. If all the LEDs on the tester board are not lit, please check P2 and TP35 solder points whether soldering correctly.
10. If only some of the LEDs are not lit, please check the corresponding solder points whether soldering correctly.
11. Turn the toggle switch to right, the blue light will be on and then enter buttons remap mode.
12. You can activate the remap function during the game and assign a maximum of 14 buttons (A, B, X, Y, L3, R3, LT, RT, LB, RB, Up, Down, Left and Right ) to the back buttons.

Package Includes:
1* Hope remap board
1* Hope tester board
1* Hope cable FPC1 & FPC2 & FPC3
1* Redesigned back shell with battery cover
1* Left right side rails
4* Back buttons
1* Prying tool
1* Cross screwdriver
1* T8h screwdriver
1* T6 screwdriver
29* Screws
Note: The controller and other parts are not included.

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
C
Constantine
Good

还不错

先生 宋
我不知该如何表达

因为我不会焊接,所以我把手柄和背键寄给了朋友让他帮我焊接,完成之后我的朋友测试发现手柄会自己输入信号,尤其是十字按键的信号,光标选框一直在xbox主页乱跑,拆下背键后手柄还是正常的,一旦焊接后又会出现十字键信号自己输入的问题,还有两个背键无法映射,我的朋友无法确认是他焊接中导致了短路让背键芯片出现了问题还是原本背键芯片就有问题,目前我并没有在用这款背键,所以我不知道它好不好用

K
Keyo
Really good one

Took some to install but I love it

S
Spencer Workman
Better then Xbox elite series 2

I had an elite series 2 controller and it had problems for the three years that I've had it. Finally one bumper was completely unresponsive and I couldn't go back to not having back buttons, so I saw this kit and after installing and using it, I will probably never buy another elite again. It's soo good. The headphone jack however is not perfectly in the right spot so headsets are a little rough to plug in.